FOCAT-8002 is a metal amine catalyst developed for polyurethane foaming system to prolong milky time and accelerate post curing. 


Typical Properties:



Colour  (Fe-Co)


g/cm3 (25℃)


mPa.s (25℃)



Light yellow transparent liquid

≤ 6



With amine smell


Environmental protection: 

It does not contain environmental restricted elements.


Solubility:It is easily soluble in polyether / polyester polyols.



It is widely used for products of soft foam, hard foam, slow rebound, high rebound, molded integral skin, foamed plate, etc., especially for the production of large parts with high production efficiency. It is especially recommended for the production of foamed insoles, soles, etc


Features & Advantage:

FOCAT-8002 is a metal amine catalyst developed for polyurethane foaming system to prolong milky time and accelerate post curing, it has the following characteristics:

  • Extend the milky white period (cream time). Compared with general tertiary amine catalyst A33, the milk white flow period can be prolonged by about 1 time.

  • Fast post-curing time (forming time). As shown in the following figure, the post curing time can be shortened by 1-2 times, significantly improving the production efficiency by more than 30-50%.


  • Anti foam collapse, stable size after demoulding: the high activity of the rear section of FOCAT-8002 effectively ensures the curing and shaping after foaming to the end.

  • Less addition. The addition amount of FOCAT-8002 is about 60% of that of ordinary amine catalyst, the specific addition amount needs to be verified by test.

  • Environmental protection. It does not contain environmental restricted elements to ensure that it meets the stringent requirements of international environmental protection regulations.

  • General purposed. Suitable for both polyether and polyester systems. It has a wide application range, which can be used in all kinds of polyurethane foam systems.


User's Guide:

  • It can be pre mixed into the white material components in advance to avoid the trouble of on-site addition and operation error, and the catalytic activity is stable and does not fail after long-term storage.

  • Normally, the packaging container must be kept closed, and the opening of the can shall be sealed immediately after use, and it shall not be placed open;

  • It is recommended to conduct storage stability test before mass use to avoid the possibility of conflict between different raw materials and additives.


Handling & Storage:

Product should be stored in a cool, dry environment away from sunlight, excessive heat and rain.


Package: 25kg/200kg in HDPE drum


Shelf Life: The unopened shelf life is 18 months from the date of manufacture. After the shelf life, if the catalytic activity still meets the needs after test, it can still be used as qualified products.

Inquiry List(0)
Already in the Inquiry List!